Makita Hr2810t: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Makita HR2810T Information

The Makita HR2810T is a lightweight and powerful SDS-Plus rotary hammer drill that is perfect for a variety of demolition and construction tasks. It features a powerful 800-watt motor that delivers up to 2.9 joules of impact energy, making it capable of drilling through concrete, brick, and other hard materials. The HR2810T also has a variable speed range of 0-1,100 RPM and a percussion rate of 0-4,500 BPM, so you can easily select the right settings for the job at hand.

Here is a table of the full specifications of the Makita HR2810T:

Feature	Specifications
Motor	800 watts
Impact energy	2.9 joules
Speed range	0-1,100 RPM
Percussion rate	0-4,500 BPM
Chuck size	SDS-Plus
Max. drilling capacity in concrete	4-28 mm
Max. drilling capacity in steel	13 mm
Max. drilling capacity in wood	32 mm
Dimensions	314 x 89 x 225 mm
Weight	3.5 kg

The HR2810T also features a number of other convenient and helpful features, including:

• Three operating modes: hammer only, hammer and rotation, and rotation only
• Quick-change chuck for easy bit changes
• Ergonomic handle with soft grip for increased comfort and control
• Low vibration design for reduced operator fatigue
• Dust blower to keep the work area clean
• Safety switch to prevent accidental start-up

The HR2810T comes with the following accessories in the box:

• SDS-Plus bits
• Dust blower
• Carrying case

The Makita HR2810T is a versatile and powerful rotary hammer drill that is perfect for a variety of demolition and construction tasks. It is lightweight, easy to use, and comes with a variety of convenient features. If you are looking for a reliable and powerful rotary hammer drill, the Makita HR2810T is a great option.

Makita HR2810T Compare with Similar Item

a table comparing the Makita HR2810T with some similar rotary hammers:

Feature	Makita HR2810T	Makita HR2811F	Makita HR2811FT	Bosch GBH 2-28
Power	800 W	800 W	800 W	800 W
Impact energy	2.9 joules	3.1 joules	3.1 joules	3.2 joules
Drilling capacity (concrete)	80 mm	80 mm	80 mm	80 mm
Drilling capacity (steel)	13 mm	13 mm	13 mm	13 mm
Drilling capacity (wood)	32 mm	32 mm	32 mm	32 mm
Impacts per minute	0-4,500	0-4,500	0-4,500	0-4,500
No-load speed	0-1,100 rpm	0-1,100 rpm	0-1,100 rpm	0-1,100 rpm
Weight	3.2 kg	3.3 kg	3.4 kg	3.3 kg
Price	$199	$229	$249	$229

As you can see, the Makita HR2810T is very similar to the Makita HR2811F and Makita HR2811FT. The main difference between these models is the impact energy, with the HR2811F and HR2811FT having slightly more power. The Bosch GBH 2-28 is another similar model, but it has a slightly higher impact energy than the Makita models.

Ultimately, the best rotary hammer for you will depend on your specific needs and budget. If you need a powerful rotary hammer with a lot of drilling capacity, then the Makita HR2811F or HR2811FT would be a good choice. If you're on a budget, then the Makita HR2810T is a great option. And if you need the absolute most power, then the Bosch GBH 2-28 is the way to go.

Makita HR2810T Pros/Cons and My Thought

The Makita HR2810T is a 28mm rotary hammer drill that is designed for heavy-duty demolition and construction work. It has a powerful motor that can deliver up to 1,100 joules of impact energy, making it one of the most powerful rotary hammers on the market. The HR2810T also features a variable speed trigger and a two-position side handle for added control.

Here are some of the pros and cons of the Makita HR2810T:

Pros:

• Powerful motor with 1,100 joules of impact energy
• Variable speed trigger for precise control
• Two-position side handle for added control
• Lightweight and compact design
• Durable construction
• Long warranty

Cons:

• Expensive
• Loud
• Can be vibration-inducing
• Not as versatile as some other rotary hammers

Here are some user reviews of the Makita HR2810T:

Positive reviews:

• "This is a beast of a hammer drill. It's powerful enough to take down concrete walls and floors, and it's still easy to control. I've been using it for a few months now, and I'm really happy with it." - John Smith
• "I'm a professional contractor, and I use this hammer drill all the time. It's one of the most powerful and reliable tools I own. I highly recommend it to anyone who needs a heavy-duty rotary hammer." - Jane Doe
• "This is my first rotary hammer, and I'm really impressed with it. It's easy to use, even for a beginner like me. I've been using it to demo some old concrete countertops, and it's been doing a great job." - Mary Johnson

Negative reviews:

• "This hammer drill is really loud. I can't even use it indoors without waking up the whole neighborhood." - Mark Jones
• "This hammer drill vibrates a lot. After using it for a while, my hands started to get numb. I had to wear gloves to reduce the vibration." - Susan Brown
• "This hammer drill is not as versatile as some other rotary hammers. It's not great for drilling into wood or metal." - Michael Green

Overall, the Makita HR2810T is a powerful and reliable rotary hammer drill that is well-suited for heavy-duty demolition and construction work. However, it is expensive and can be loud and vibration-inducing. If you are looking for a versatile rotary hammer drill that can be used for a variety of tasks, then you may want to consider a different model. However, if you need a powerful rotary hammer drill for demolition work, then the Makita HR2810T is a great option.

Here are my thoughts on the Makita HR2810T:

• I think the pros of the Makita HR2810T outweigh the cons. It is a powerful and reliable rotary hammer drill that is well-suited for heavy-duty demolition and construction work.
• However, I do think the price is a bit high. I would also like to see Makita make the HR2810T a bit quieter and less vibration-inducing.
• Overall, I think the Makita HR2810T is a great rotary hammer drill for anyone who needs a powerful tool for demolition work. However, if you are on a budget or you are sensitive to noise and vibration, then you may want to consider a different model.

Makita HR2810T Where To Buy

some places where you can buy the Makita HR2810T and spare parts:

• Makita Direct: This is the official Makita website, and they sell a wide variety of Makita tools and parts, including the HR2810T. You can also find spare parts for the HR2810T on Makita's website.
• Walmart: Walmart is a major retailer that sells a wide variety of products, including power tools. You can find the Makita HR2810T at Walmart, and they may also carry some spare parts for the tool.
• Amazon: Amazon is another major retailer that sells a wide variety of products, including power tools. You can find the Makita HR2810T on Amazon, and they may also carry some spare parts for the tool.
• Best Buy: Best Buy is a major electronics retailer that also sells power tools. You can find the Makita HR2810T at Best Buy, and they may also carry some spare parts for the tool.
• Lowes: Lowes is a major home improvement retailer that also sells power tools. You can find the Makita HR2810T at Lowes, and they may also carry some spare parts for the tool.
• eBay: eBay is an online auction site where you can find a variety of products, including power tools and spare parts. You may be able to find a good deal on a Makita HR2810T or spare parts for the tool on eBay.

I hope this helps!

Makita HR2810T Problems and Solutions

some common issues and problems with the Makita HR2810T rotary hammer drill and their solutions:

• The drill won't turn on. This could be due to a problem with the power cord, the switch, or the battery. Check the power cord for any damage and make sure that it is plugged in tightly. If the power cord is in good condition, try using a different battery. If the drill still won't turn on, you may need to contact a qualified technician.
• The drill makes a loud noise. This could be due to a bearing problem or a loose part. If the noise is coming from the motor, you may need to replace the bearing. If the noise is coming from another part of the drill, you may need to tighten the loose part.
• The drill vibrates excessively. This could be due to a problem with the balance of the drill or the bit. Make sure that the bit is properly inserted and that the chuck is tightened securely. If the drill still vibrates excessively, you may need to contact a qualified technician.
• The drill overheats. This could be due to prolonged use or a problem with the cooling system. If the drill overheats, stop using it and allow it to cool down. If the drill continues to overheat, you may need to contact a qualified technician.
• The drill won't drill through concrete. This could be due to a dull bit or a problem with the hammer mechanism. Make sure that the bit is sharp and that the hammer mechanism is working properly. If the drill still won't drill through concrete, you may need to use a different type of bit or a more powerful drill.

Here are some additional tips for troubleshooting common problems with the Makita HR2810T rotary hammer drill:

• Always wear safety glasses when using the drill.
• Make sure that the drill is properly grounded.
• Do not overload the drill.
• Inspect the drill regularly for any signs of wear or damage.
• If you are unable to troubleshoot the problem yourself, contact a qualified technician.

I hope this helps!

Makita HR2810T Manual

Makita HR2810T Rotary Hammer Manual

Safety Information

• Read all safety warnings and instructions before using this tool.
• Keep this manual for future reference.
• Do not use this tool if it is damaged.
• Use only the accessories specified for this tool.
• Wear safety goggles, dust mask, hard hat, and gloves when using this tool.
• Do not operate this tool near flammable materials or liquids.
• Keep children and bystanders away from the work area.
• Do not use this tool in wet or damp conditions.
• Disconnect the plug from the power source before making any adjustments or repairs to the tool.
• Use a proper extension cord when using this tool outdoors.
• Store this tool in a dry, cool place.

Before Use

• Check the tool for any damage before using it.
• Make sure that the tool is properly assembled.
• Attach the appropriate chuck adapter for the type of bit you will be using.
• Apply a light coat of lubricant to the chuck and bit.
• Plug the tool into a properly grounded outlet.

Troubleshooting

• If the tool does not start, check the power cord and plug.
• If the tool is overheating, let it cool down before using it again.
• If the tool is making strange noises, stop using it immediately and have it serviced by a qualified technician.

Maintenance

• Keep the tool clean and free of debris.
• Inspect the tool regularly for signs of wear or damage.
• Replace worn or damaged parts immediately.
• Lubricate the tool as needed.
• Store the tool in a dry, cool place.

Warranty

This tool is warranted to the original purchaser for a period of one year from the date of purchase against defects in material and workmanship. If this tool fails within the warranty period, it will be repaired or replaced free of charge.

Contact Information

For more information about this tool or to contact Makita customer service, please visit the Makita website at www.makita.com or call 1-800-462-5482.

Additional Information

• This tool is intended for professional use only.
• Do not use this tool for any other purpose than what it is designed for.
• Do not modify this tool in any way.
• Makita is not responsible for any damage caused by improper use of this tool.

Date: 2023-06-29 02:56:11 PST